|
 |
| MCU Core
|
• 80MHz, 1.53 DMIPS/MHz, 32-bit MIPS M4K Core
• 5 Stage pipeline, Harvard architecture
• MIPS16e mode for up to 40% smaller code size
• Single cycle multiply and hardware divide unit
• 32 x 32-bit Core Registers
• 32 x 32-bit Shadow Registers
• Fast context switch and interrupt response
|
|
| Analog Features
|
• 512K Flash (plus 12K boot Flash)
• 32K RAM (can execute from RAM)
• 4 channel hardware DMA controller
• Flash prefetch module with 256 Byte cache
• Look instructions or data in cache for fast access
• Programmable vector interrupt controller
|
|
|
|
| Power Management Modes
|
• RUN, IDLE, DREAM and SLEEP modes
• Multiple switchable clock modes for each power mode, enables
optimum power settings
|
|
| MCU System Features
|
• Fast and Accurate 16 channel 10-bit ADC
• Max 500k samples per second at +/- 1LSB, conversion available
during SLEEP & IDLE
|
|
| Debug Features
|
• 8 hardware breakpoints (6 Instruction and 2 Data)
• iFlow Trace: Real-time non-intrusive hardware instruction trace
(5 Wires)
• 2 wire programming and debugging interface
• JTAG interface supporting Programming, Debugging and
Boundary scan
|
|
| Other MCU Features
|
• Fail-Safe Clock Monitor – allows safe shutdown if clock fails
• Hardware RTCC (Real-Time Clock and Calendar with Alarms)
• 2 Internal oscillators (8MHz & 31KHz)
• Watchdog Timer with separate RC oscillator
• Pin compatible with 16-bit PIC® MCUs
|
|
|
Processor Plug-In Modules are small circuit boards to be used with the various Microchip Development Boards to evaluate Microchip microcontrollers and dsPIC devices. These plug into the main processor socket of the Development Boards so that different microcontrollers can be used for prototyping, demonstration or development – quickly and easily. Microchip development tools such as the MPLAB© REAL ICE™ and MPLAB ICD 2 connect directly to these development boards and provide quick, full-featured hardware/software/firmware development environment using the free MPLAB Integrated Development Environment software.
