Ballast Products & LED Interconnections

New Ballast Products & LED Interconnections from Tyco Electronics

Hermaphroditic Blade and Receptacle Connector The Hermaphroditic Blade and Receptacle connector - a connector that mates to itself and is capable of being articulated from 90° to 180° - is a new SMT connector intended for use with in-line board-to-board applications.

A99123TR-ND (2 Position, White) A99126TR-ND (2 Position, Black) A99124TR-ND (4 Position, White) A99127TR-ND (4 Position, Black) A99125TR-ND (6 Position, White) A99128TR-ND (6 Position, Black)

Features  • Available in 2, 4, and 6 Positions  • Connector Mates to Itself  • Single Part to be Stocked and Placed onto PCB per Position  • Connector Mates and Unmates Horizontally and Vertically -3 Axis    Mating  • Connector can be Articulated from 90° to 180°  • Tape and Reel Packaging for High Speed SMT Processes  • Low Profile Flat Surface is Compatible with SMT and Reflow    Processing  • Rounded Corners to Minimize Shadowing  • Redundant SMT Pads  • Solder Pad Footprint Compatible with Tyco Electronics SMT Poke-In    LED Connector  • RoHS Compliant Applications  • LED Lighting Modules  • Incandescent Lighting Strips  • Channel Lettering

LIGHT-N-LOK Connectors A new connector for fluorescent ballast lighting applications provides a hot-pluggable disconnect to allow safe field servicing without exposing personnel to electrical shock hazards. Available in 2 or 3 position pre assembled mated connector sets or with factory installed flying leads. The connector accepts 18 AWG solid wire.

A97617-ND (2 Position) A97691-ND (3 Position)

Features  • Available in 2 and 3 Position Sizes  • Poke-In Termination for 18 AWG Solid Wire for Easy Tool-Less,    Field or Factory Installation  • Integral Strain Relief Prevents Inadvertent Wire Twist Out and Pull Out  • Designed for Hot Plugging  • Snag Resistant Rounded Housings  • Compact Connector Housings: 2 position Assembly Fits Through a    5/8” Diameter Knock-Out Opening; 3 Position Assembly Fits    Through a 7/8” Diameter Knock-Out Opening  • Connector Latches Prevent Unintentional Disconnect of Connector  • Standard 3/8” Wire Strip Length  • Can be Supplied as Pre-Assembled Mated Connector Sets with or    without Factory Installed Flying Leads  • Product is Marked (English/French) in Support of CSA Luminaire    Labeling Requirements Applications  • Commercial Ballast Lighting System

Surface Mount Technology (SMT) Poke-In Connectors Available in 1-position or 2-position, these low profile wire poke-in connector is designed for LED lighting applications. Available in surface mount tape and reel packaging, the connector is designed to accept a wide range of wire sizes and types.

A97618TR-ND (SMD - 2 Position) A99133TR-ND (SMD - 1 Position) A99134TR-ND (Through Hole - 1 Position)

Features  • Tape & Reel Packaging for High Speed SMT Processes  • RoHS Compliant Redundant SMT Pads Prevents Peeling  • Rounded Corners to Minimize Shadowing  • Side to Side Stackable with Pads on 4mm Centers  • Accepts 18, 20, 22 AWG Solid Wire; 18, 20 AWG Prebond Stranded;    18 AWG Stranded  • Cost Effective Alternative to Hand Soldering Wires  • Low Profile Design  • Flat Top Surface Allows for Vacuum Pick Up  • High Temperature Material for Reflow Processing Applications  • Lighting Controls  • Interconnecting Strings of Printed Circuit LED Light Modules

IDC Poke-In Wire Tap/Splice IDC Poke-In Wire Tap/Splice combination design accommodates quick termination of power wiring (tap) out to individual light fixtures (splice). The two-piece, dove tail housing alignment design ensures IDC termination. The tap wire retention force exceeds 10 pounds.
A97619-ND (Brown) A97620-ND (Blue)	Features  • Tap Termination Allows Feed-Through in 12 AWG (Solid or Stranded)    or 18 AWG THHN/THWN Wire  • Splice Poke-In Accommodates Two (2) Pre-Stripped 18 AWG Solid    Wires  • Cost Effective Termination System for Installation of Ballast Lighting    Systems Applications  • Commercial Ballast Lighting System